一种临近空间升浮一体飞行器气动布局设计研究

应用理论方法和数值模拟方法开展升浮一体太阳能无人机气动布局设计研究,通过优化选形设计获得高升阻比气动布局,对比两种方法的计算结果以及分析存在差别的原因;应用张线天平支撑风洞试验测试技术,对设计布局开展实验验证研究,建立大展弦比的双机身气动布局风洞试验测试方法,分析了不同雷诺数下实验模型的纵向和横向气动特性影响。研究结果表明:风洞试验结果与设计结果吻合良好,验证了设计结果的可靠性,获得了对总体设计具有指导意义的结论和试验数据结果。     

大型齿轮在多因素耦合影响下齿形误差测量的灰色动态预报

提出了一种旁置式的大型齿轮测量装置,分析了影响该装置测量精度的主要误差来源及其特性,给出了一种处理多因素耦合影响的灰色动态预报方法.首先,基于测量装置特性,对影响齿形误差测量精度的误差源进行分析和标定,计算出各误差源的灵敏度系数;然后对测得的有限误差数据进行再抽样及灰色生成,分别计算出在每次测量中各影响因素对测量结果的作用大小,之后按照误差合成方法生成误差源耦合作用结果;最后,通过在测量结果中去除耦合作用进而提高大型齿轮齿形误差测量精度.与测量精度为0.5μm的三坐标测量机进行对比测量,结果表明所提出测量装置能满足3级精度以上的大型齿轮齿形误差检测需求.     

空间自旋目标平动补偿与微动特征提取方法

针对空间自旋目标平动补偿与微动(m-D)特征提取问题，提出一种基于延时共轭相乘和微动分解的平动补偿与特征提取方法。该方法通过延时共轭相乘处理实现目标加速度估计，然后构建冗余的微动原子集，对加速度补偿后信号进行微动分解补偿，通过搜索补偿信号的最大谱峰获取目标的微动特征与速度信息。仿真试验表明,所提方法能够有效估计空间自旋目标的运动参数，并快速提取其微动特征。     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.     

热等静压对激光选区熔化成形GH4169合金持久性能的影响

采用激光选区熔化(SLM)成形技术制备了GH4169合金,运用金相显微镜(OM)、扫描电子显微镜(SEM)、电子背散射衍射(EBSD)和透射电镜(TEM)等分析手段分析了热等静压对SLM成形GH4169合金组织及持久性能的影响规律。结果表明:沉积态合金组织中,沿沉积方向的晶粒为柱状晶,晶粒内枝晶组织细小,枝晶间分布大量Laves相;热等静压处理可有效消除组织中气孔缺陷,溶解大部分Laves相,促使组织晶粒等轴化,并减少后续980℃固溶处理过程中δ相在晶内的析出;热等静压处理能提高合金的持久寿命,但会降低合金的持久塑性。     

基于比例归一化LMS算法次级通道模型辨识

将主动噪声控制技术应用于地铁通风隧道的噪声控制上，其应用效果在很大程度上取决于信号处理的实时性。在保证控制算法收敛的基础上，要求算法收敛速度尽可能快，以确保对声波变化的准确跟踪，据此产生匹配的振幅相等、相位相反的次级声信号，进而对噪声进行控制。利用比例思想对LMS算法进行改进，为小系数配上小的步长因子，为大系数配上较大的步长因子。最后，将其应用在地铁通风隧道的次级声通道模型的辨识上，并与常用的LMS算法在收敛速度、稳态失调性能上做出比较。数值分析结果表明，采用改进后的LMS算法能够有效地加快算法收敛，改善算法的稳态失调性能。     

基于EKF的主动雷达寻的制导状态估计与最优控制研究

针对主动雷达寻的制导问题,进行了非线性系统状态估计和最优制导律的研究,并进行了目标机动情况下的仿真验证。利用主动雷达给出的带有噪声的观测信息,设计了寻的制导系统扩展卡尔曼滤波器,估计弹目相对运动状态信息。基于最优控制理论,按照需用过载和脱靶量最小设计了线性二次型最优制导律。仿真结果表明,所设计的主动雷达寻的制导系统滤波器和最优制导律能有效对付机动目标,满足飞行器控制要求。     

月面远程运输飞行轨迹优化设计

针对月球表面不同区域之间的载人或载货运输问题,设计了一种基于上升-巡航-下降模式的燃料最省飞行轨迹。首先通过求解不同飞行时间的Lambert问题确定了最佳飞行时间,并获得了对应的双脉冲解,然后利用有限推力替代两次速度脉冲,建立了非线性规划问题,求解得到了有限推力燃料最省飞行轨迹。优化设计过程中主要研究了两个主要难点:bang-bang控制与飞行高度约束。这两个问题通过推力加速度与飞行时间的数值延拓得以解决,同时揭示了月面飞行的基本原理。最后给出了3种不同应用场景的仿真算例,仿真结果表明,当飞行时间为小时量级时,上升-巡航-下降飞行模式下的优化解即为燃料最优解,如果飞行距离较远,则还需要适当增加飞行时间从而满足飞行高度约束。